Hello,
I would like to do a portage of the ChibiOS/RT on my Power PC SPC564A (e200z4 core). I am using Code Warrior.
But, I am an beginner in this domain . Then, I don't know if you have a document which can explain how to process; Or if you have already a little project with this PPC.
Thank you for your help.
Louis
PORT of ChibiOS/RT on SPC564A
- Giovanni
- Site Admin
- Posts: 14455
- Joined: Wed May 27, 2009 8:48 am
- Location: Salerno, Italy
- Has thanked: 1076 times
- Been thanked: 922 times
- Contact:
Re: PORT of ChibiOS/RT on SPC564A
Hi,
Version 16.1 already supports SPC564A using the HighTec compiler. The code in repository supports codewarrior too, there are already working demos, it will be released in Q3.
Giovanni
Version 16.1 already supports SPC564A using the HighTec compiler. The code in repository supports codewarrior too, there are already working demos, it will be released in Q3.
Giovanni
Re: PORT of ChibiOS/RT on SPC564A
Hi,
Thank you for your answer. Actually, I just want to copy/paste the RTOS in my project without involve it in my code.
But I don't see the linker file of the SPC564A (*.lcf). That's why when I try to compile it with CW, I have some "link error".
I don't know if you have it.
Best regards.
Louis
Thank you for your answer. Actually, I just want to copy/paste the RTOS in my project without involve it in my code.
But I don't see the linker file of the SPC564A (*.lcf). That's why when I try to compile it with CW, I have some "link error".
I don't know if you have it.
Best regards.
Louis
- Giovanni
- Site Admin
- Posts: 14455
- Joined: Wed May 27, 2009 8:48 am
- Location: Salerno, Italy
- Has thanked: 1076 times
- Been thanked: 922 times
- Contact:
Re: PORT of ChibiOS/RT on SPC564A
Hi,
I have created demos only for SPC560D and SPC56EC so far, you need to adapt one of those icf files (the SPC56EC one is very close, same Z4).
Giovanni
I have created demos only for SPC560D and SPC56EC so far, you need to adapt one of those icf files (the SPC56EC one is very close, same Z4).
Giovanni
Who is online
Users browsing this forum: No registered users and 7 guests