Re: MCHCK support
Posted: Thu Sep 17, 2015 5:46 pm
OK, I've tried to figure this out (but please bear in mind that I'm an ARM newbie).
Freescale K20 chips seem to have FlexRAM (a piece of memory that can be used either as EEPROM or RAM). The configuration for this is stored at 0x400, 16 bytes total. Described in the K20 reference manual, page 503.
So I guess this (flashcfg) should be left in the ld file as-is, just move "flash" to 0xc00.
Freescale K20 chips seem to have FlexRAM (a piece of memory that can be used either as EEPROM or RAM). The configuration for this is stored at 0x400, 16 bytes total. Described in the K20 reference manual, page 503.
So I guess this (flashcfg) should be left in the ld file as-is, just move "flash" to 0xc00.