STM32WLxx port

Discussions and support about ChibiOS/HAL, the MCU Hardware Abstraction Layer.
User avatar
Giovanni
Site Admin
Posts: 14444
Joined: Wed May 27, 2009 8:48 am
Location: Salerno, Italy
Has thanked: 1074 times
Been thanked: 921 times
Contact:

Re: STM32WLxx port

Postby Giovanni » Tue Dec 15, 2020 11:28 am

vrollei wrote:I have noticed new LLD/RCCv1 module, but it can not be used directly with STM32WL port without some modification.


Same with the WB port, I will look into this later.

Giovanni

User avatar
FXCoder
Posts: 384
Joined: Sun Jun 12, 2016 4:10 am
Location: Sydney, Australia
Has thanked: 180 times
Been thanked: 130 times

Re: STM32WLxx port

Postby FXCoder » Wed Dec 16, 2020 1:22 am

FYI CubeWL and the new WB55-NUCLEO now on ST site WL page...
https://www.st.com/en/microcontrollers- ... eries.html

User avatar
FXCoder
Posts: 384
Joined: Sun Jun 12, 2016 4:10 am
Location: Sydney, Australia
Has thanked: 180 times
Been thanked: 130 times

Re: STM32WLxx port

Postby FXCoder » Wed Feb 17, 2021 2:05 am

Hi,
Seeing as the WB55 is in (at a single core level at least) could the WL port into trunk be started now?
--
Bob

User avatar
Giovanni
Site Admin
Posts: 14444
Joined: Wed May 27, 2009 8:48 am
Location: Salerno, Italy
Has thanked: 1074 times
Been thanked: 921 times
Contact:

Re: STM32WLxx port

Postby Giovanni » Wed Feb 17, 2021 9:00 am

Yes, which board should I get for this one?

Giovanni


vrollei
Posts: 163
Joined: Sun Nov 13, 2016 8:44 am
Been thanked: 26 times

Re: STM32WLxx port

Postby vrollei » Wed Feb 17, 2021 9:27 am

NUCLEO-WL5JC board files and standard demo are in the archive.
Vitaly

User avatar
FXCoder
Posts: 384
Joined: Sun Jun 12, 2016 4:10 am
Location: Sydney, Australia
Has thanked: 180 times
Been thanked: 130 times

Re: STM32WLxx port

Postby FXCoder » Wed Feb 17, 2021 11:44 am

Would you also need a WLE5 based board for developing the single core?

vrollei
Posts: 163
Joined: Sun Nov 13, 2016 8:44 am
Been thanked: 26 times

Re: STM32WLxx port

Postby vrollei » Wed Feb 17, 2021 12:16 pm

This port is only for M4 core, it does not matter WL or WLE.
M0+ core needs additional port, I will do it later.
Vitaly

vrollei
Posts: 163
Joined: Sun Nov 13, 2016 8:44 am
Been thanked: 26 times

Re: STM32WLxx port

Postby vrollei » Tue Apr 13, 2021 7:57 pm

Hi,

just run rt_test_suite and oslib_test_suite on STM32WL55CC, all tests completed successfully.
Vitaly

User avatar
FXCoder
Posts: 384
Joined: Sun Jun 12, 2016 4:10 am
Location: Sydney, Australia
Has thanked: 180 times
Been thanked: 130 times

Re: STM32WLxx port

Postby FXCoder » Wed Apr 14, 2021 8:53 am

Hi Vitaly,
Is the earlier tar file the one that should be applied to trunk or do you now have an updated version?
--
Bob


Return to “ChibiOS/HAL”

Who is online

Users browsing this forum: No registered users and 4 guests