*****************************************************************************
** ChibiOS/RT port for ARM-Cortex-M4 STM32F407.                            **
*****************************************************************************

** TARGET **

The demo runs on an Olimex STM32-E407 board.

** The Demo **

The demo currently just flashes a LED using a thread and serves HTTP requests
at address 192.168.1.10 on port 80.
FatFs integrated using SDIO.
The USB-FS port is used as USB-CDC and a command shell is ready to accepts
commands there.

** Build Procedure **

The demo has been tested by using the free Codesourcery GCC-based toolchain
and YAGARTO.
Just modify the TRGT line in the makefile in order to use different GCC ports.

The demo has also been tested by using IAR toolchain. The iar project files 
are relocatable if the relative location of the iar directory is maintained. 
As such, the base code can be moved to a different Chibios release, e.g. from
Chibios trunk to Chibios 16.1.x, and the files imported into the project will
be update to the current code base. However any changes to the hal/os filesystem
structure will need to be handled manually. The current project contains linkages
for 16.1.x and trunk filesystem structure (requires iar selection of 
inclusion/exclusion from build to handle files that have moved/changed names). 

** Notes **

Some files used by the demo are not part of ChibiOS/RT but are copyright of
ST Microelectronics and are licensed under a different license.
Also note that not all the files present in the ST library are distributed
with ChibiOS/RT, you can find the whole library on the ST web site:
http://www.st.com
