*****************************************************************************
** ChibiOS/RT port for ARM-Cortex-M0+ STM32L031.                           **
*****************************************************************************

** TARGET **

The demo runs on an STM32 Nucleo32-L031K6T6 board.

** The Demo **

The demo writes data to on-chip EEPROM, and displays the results for verification. 
Output is to the serial port SD2 (USART2, mapped on USB virtual COM 
port configured 9600,n,8).

** Build Procedure **

Tested using the ChibiStudio V17 environment, with a snapshot of the repository
trunk taken on 4th January 2017

****************** Needs updated scatter file STM32L031x6.ld **************************
This is in the project root directory; use it to overwrite the existing file in
    CHIBIOS\os\common\startup\ARMCMx\compilers\GCC\ld
***************************************************************************************


** Notes **

Some files used by the demo are not part of ChibiOS/RT but are copyright of
ST Microelectronics and are licensed under a different license.
Also note that not all the files present in the ST library are distributed
with ChibiOS/RT, you can find the whole library on the ST web site:

                             http://www.st.com
