ChibiOS Free Embedded RTOS

hi, in this period i have a similar problem, you can use Serial Driver in this metodology you can use
1) Event you can see this http://forum.chibios.org/phpbb/viewtopic.php?f=16&t=2944
or
2) use chnRead(&SD1,&bufferMsg,64); if you want use uart directly, you know is very hard to learn

i fix it, the code that i write is good but i set the pull UP the pin RX for use it

thanks for all.
A.

Hi to all, i connect with a wire PA9 and PA10, i want similate when arrived data on SD1,
when arrived daa on sd1 start a event

if i write this

static THD_WORKING_AREA(waRead5, 128);
static THD_FUNCTION(Thread5,arg) {
(void)arg;
chRegSetThreadName("th_Riempio_Buffer");

event_listener_t ...

hi to all, i want start a event when on SD1 arrived data, i wired the pin tx and rx for simulate the arrive data on SD1,
i fix some errore in last post, and write this code:


static THD_WORKING_AREA(waRead5, 128);
static THD_FUNCTION(Thread5,arg) {
(void)arg;
chRegSetThreadName("th_Riempio ...

i want start a event when on SD1 arrived data, i wired the pin tx and rx for simulate the arrive data on SD1,
i write this code but when i start program the thread go in status WTANDEVT, and don't running,

event_listener_t Uart1Data;
static THD_WORKING_AREA(waRead5, 128);
static THD_FUNCTION ...

hi rewrite all with event system but don't work......
I don't understand where is the error,


static uint8_t bufferMsg[BUFFER_SIZE];
/*
* Pointer to the UART handler thread.
*/
static THD_WORKING_AREA(waRead5, 128);
static THD_FUNCTION(Thread5,arg) {
chRegSetThreadName("th_Riempio ...

hi to all
i write this code
#define EVT_UART_RX EVENT_MASK(0)
#define EVT_UART_TX EVENT_MASK(1)
#define EVT_UART_ERR EVENT_MASK(2)

/*
* Pointer to the UART handler thread.
*/
static const uint8_t errore[]="Error uart";
static const uint8_t dati[]="Dati uart";
static const ...

Giovanni thanks for your answer i fix it with
but where don't find [code]]UART_SR_ERRORS[/code

Antonio

hI AlSith my code is here:
static THD_WORKING_AREA(waRead5, 128);
static THD_FUNCTION(Thread5,arg) {
chRegSetThreadName("th_Riempio_Buffer");
msg_t charbuf;
// int count=0;
// char B2[] = "E_2";
// char B3[] = "E_3";
uint8_t c;
event_listener_t Uart1Data;
eventmask_t flags ...

Hi to all, in some example i have read the possibility to resetting status bits of UART,
i read


the function SR don't exist, in version 3.0 is change the name or others?
bye
A.