ChibiOS Free Embedded RTOS

Hi,

I'm trying to got ADC values from single-scan and not continuous.
I'm using ping PF4 of ADC3_IN14. I've activated ADC and ADC3 in mcuconf.
My main is as following (Based on code found at m) :


// Create buffer to store ADC results. This is
// one-dimensional interleaved array
#define ADC ...

i'm stuck with the chcfg thing.

As i understand there is only one choice for the PIN13, then the default chcfg doesn't needs to be changed ?

<pin13 ID="LED" Type="PushPull" Speed="Maximum" Resistor="Floating" Level="High" Mode="Output" Alternate="0" />

If yes, my first post, with the right ...

right, according to the manual there seems to be no hw change impact on the board specs since REV_D, so my board does use the REV_E (because of the ethernet change in REV.D).

i've searched about ".chcfg" and be able to re-generate files using ChibiStudio but dont understand yet what to edit in that ...

Hi, thanks.

I've missed the step of assigning pins.. i will look with ChibiStudio.

My board is REV.E so i think the board files are "OLIMEX_STM32_E407" instead of "OLIMEX_STM32_E407_REV_D".

Hello,

I've tryied the demo "ARMCM4-STM32F407-LWIP" but it doesn't works on the E407 (no ping nor web page, led doesn't blink).

I've found that the F407 is different than the E407 finally, so i've tryied to do a simple blink to start.

I've edited Makefile to use "$(CHIBIOS)/boards/OLIMEX_STM32 ...