ChibiOS Free Embedded RTOS

Hi Again,

I'm still having problems its working but missing every 3rd or 4th ADC read looking at the oscilloscope it seems it not finishing the last transfer in time.

so the blue trace is the DRDY line which I am triggering the EXTI from, the yellow line is the chip select (active low)
m

zoomed ...

Thanks for the reply,

That was how my code was originally structured (I used SPIstartRead as i was only receiving) but I found it stopped working (EXT was triggering but the SPI callback wasn't and the SPI_CS stayed low) when I stressed the USB virtual serial (I'm outputting the ADC data in HEX to ...

So after a bit of head scratching and getting my head around some ideas I have a solution that seems to be working

So when the EXT interrupt is triggered I wake a thread as per (m), the thread has an absolute priority has the following code;

void SpiAdcThread() {

while (true) {

/* Waiting ...

HI Guys,

I'm after a little guidance (or maybe a lot) I currently have an STM32F103VET interfacing to a AD7767 24bit ADC, so the current code that works by itself it uses the ext driver to trigger and interrupt on the falling edge of the DRDY pin (from the ADC). From the interrupt I can call a ...

Thanks Marco for the heads up, I did look at other demos but didn't find any other examples.

Anyway I got it working! So the working area needed to be defined in both the header and the source file, also the thread function could not be static but instead extern.

Thanks Everyone
Simon

main.c ...

Unfortunately no Luck.

I've decided to move on and use plan B which was to encapsulate the code in the thread in another function that I call from the thread. The below code complies but I have not tried it on the my hardware.

Thanks for your help.
Simon

/*
ChibiOS - Copyright (C) 2006&#46 ...

Thanks or the reply, I had already added the "blinky.c" to the makefile. Both Source and header are in the same path as the main.c

I do not want to make a library make file just yet if it can be avoided.

Thanks
Simon Golding ...

Hi I am also having difficulty creating a file for each one of my threads. My current project has a massive main.c that I am looking to break into smaller files.

Deciding to keep it simple I have used basic example, and have tried to move the blinker to a new file. At this point I have just moved ...

Just confirming using the latest msys-1.0.DLL from the MiniGW link above works on my Windows 8.1 64Bit at home.

I've been looking into this issue and I have found this page which explains the file that dhruvin91 linked.

m

Also there is a latter version of msys-1.0 on the mingw sourceforge page

m

Its file version is 1000.11.0.0 when the msys-1.0.DLL supplied with preview 7 is 1000.8.0.0 I have tested the ...