ChibiOS Free Embedded RTOS

Xilinx Zynq series. One core with Linux / Android, second core with ChibiOS.

I'm running into the floating point problem also. Dit anyone ever fix this?
I'm using the embedded gdb from launchpad, 4.6-2012-q1-update.

If possible put the training on youtube too, you'll reach a larger audience.
We approached ST for sponsoring through their marketing manager, i happened to have his business card from some conference.

I have attached a part of the STM32F4 with KSZ8031 design. The prototypes work with the FreeRTOS lwIP demo, no further tests were done.

To solder the center pad, you could design your board with a nice big via underneath the chip so you can solder it by hand. 50% solder coverage is plenty for a ...

Giovanni, it seems hazelnusse is using the quadrature encoder input function of the timers.

I was just checking for a SPI slave driver, and found out there isn't one. I was planning to use a STM32F4-DISCOVERY to interface with an Arduino Uno (for education purposes). The STM32F4 would interface with 3 high resolution magnetic rotary encoders, 6 analog input (strain gauges) and PWM output ...

What's the most efficient way to start an SPI transmission at regular intervals, say 10000 3x8bit transactions per second at 1Mbit? Are virtualTimers suitable for this, or are better solutions available?

Giovanni wrote:[...]
5) LCD to be used through a "soft SPI" not a real one.
[...]

The Nokia6610 display uses a 9bit SPI interface, STM32F series only supports 8/16bit transfers. An often overlooked alternative is 9bit USART mode, which we used in our design with a Nokia6610 display.

ST has some more PLL design/verification to do then I guess. And an errata to add.
Thanks for letting us know!

mabl wrote:Ok, turns out the license is GPL - too bad, I would have preferred LGPL...

Looks like a LGPL license was committed 13 days ago...