ChibiOS Free Embedded RTOS

Well, I've found the problem.

I just run app2 using st-link and write the value of every control register and then run app2 from bootloader, and compare control register values with previous one.

Preblem is that when you run app2 form bootloader CONTROL register value is 0x0000006 (so it is fpu ...

Any ideas? Even most stupid?
I just don't know what to check next.

Have you initialize the NVIC register that points to the vectors table? (VTOR) assuming the library code is supposed to do that, is it really initialized?

Giovanni

Yes, it was a first that I check. VECT_TAB_OFFSET definition is responsible for it:
/* Configure the Vector Table location add ...

I wrote and bootloader using Chibios 3.0.x and an application using Chibios 3.0.x too (app1) and everything works fine: bootloader flahses and jumps to application.
But now i have to flash apllication written using just CMSIS and some st libraries (app2) and I have a problem. Application flashes ...

I found some misunderstanding about SPI using.

I need to read some 16bit registers from MS5611:
http://zaripov.net/exch.png

If I try to read using non-blocking function:

txbuf[0] = MS5611_CMD_PROM_READ_C1;
txbuf[1] = 0x00;
rxbuf[0] = 0x00;
rxbuf[1&#93 ...

Yes, it is good solution.
Thanks for fast reply!

Is it possible to know amount of available bytes in serail over usb? I can't find appropriate function to do this.

Giovanni wrote:Which version of Keil? I am having problems with 5.10 using ST-Link too.

Giovanni

I have MDK-ARM ver 4.72.1.0

Before I didn't face with such problem. Only when include ChibiOS to my project I noticed it.

Problem is solved, everybody thanks for patience and help.

If someone is interesting, the problem is in the Keil or ST-Link I think. After compile and load program to the flash, program doesn't start or start incorrectly. If after loading program push reset button, everything inits and ...

which board are you used for? If is STM32F4-Discovery must worked like a charm,
Lately i used some custom board STM32F407, and have some trouble with USB-CDC. After some search in google i found this topic, http://forum.chibios.org/phpbb/viewtopic.php?f=2&t=936
Yeah i Forgot to connect VBUS in my ...