ChibiOS Free Embedded RTOS

Hi,
Thanks for answering me.
I've another question : to check this frequency I'd like to use an IO in output mode, to see this "clk = 102.4 Hz" with my oscilloscope, and in this way, I'll be sure that I am using the good one...
Is that possible?
Anyone has a code example?

Thanks,

Raul

Happy new year 2017 everyone,

I'm working on a stm32f401re nucleo board and I would like to configure the timer 3 to trigger my adc (trgo) with a frequency of 102.4 Hz, currently modifying pll and prescaler I have a freq of 102.5 Hz (why this frequency ?) in addition it is not stable .

I changed ...

Hi everybody,

I'm working with nucleo STM32F401 board and ChibiOS 16.1.4

I have a problem with the IO's behavior when I start my board or after a reset my IO's output is 1 logic during 210ms (pulse) and I need that it stays in 0 logic but I do not know to do it... a pull down does not works.

in ...

Thanks!

your website is very interesting...

I'm going to see your demos...

Raul

Thanks a lot,

I'm going to try that...



Raul

Hi everyone,

I'm working with nucleo STM32F401 board and ChibiOS 16.1.3

My question is : how do I configure my ADCConversionGroup to have in channel 0 a sampling frequency = ~100 HZ, I read that we have to set the ADC_SMPR2 register but we have only 3 bits, I mean 8 choices...

Maybe if I use the ...