ChibiOS Free Embedded RTOS

Hello,

Looking into the reference, STM32F072 has 8 endpoints, which could lead to three CDC devices (with one endpoint free), which is tempting.

I took USB_CDC_IAD demo from testhal/STM32F3xx and it's working fine, as far I could tell (did just quick tests), so full of optimism, I tried to fiddle ...

I have installed standard edition "for C/C++ developers"

installed features:
org.eclipse.cdt (9.0.0.201606062011) "Eclipse C/C++ Development Tools"
org.eclipse.cdt.build.crossgcc (9.0.0.201606062011) "CDT GCC Cross Compiler Support"
org.eclipse.cdt.gdb (9.0.0.201606062011) "GDB Common"
org.eclipse ...

Cannot complete the install because one or more required items could not be found.
Software being installed: ChibiOS Eclipse Tools 2.3.0.201603121101 (org.chibios.eclipse.tools.feature.feature.group 2.3.0.201603121101)
Missing requirement: ChibiOS Eclipse Tools 2.3.0.201603121101 (org.chibios ...

Greetings,

I was implementing hardware modbus support on STM32F072 because somehow I messed Virtual Timers (for idle detection) beyond point of return.

I succeded, but run into some obstackles:

1) No API for setting RTOR register, workarounded by UARTD2.usart->RTOR |= MODBUS_15SPACE_BITS;
2 ...

Hi,
default state is set in board.h (you can change this state through palSetXXX, palClearXXX or palWriteXXX).
BY the way, if you have to change pad mode in certain point of you application palSetPadMode() is the right API. If you have to set up the whole board just once (like a kind of ...

Hello,

I have strange behaviour on STM32F072 MCU, when setting pin to push/pull output.
I was expecting logical Low as default state (and according reference manual and StdPeriph sample it should be), but pins have high state.

It is intended, it's a bug, or bad code?

Sample code:

palSetPadMode ...