ChibiOS Free Embedded RTOS

Giovanni wrote:Hi,

Is the transceiver actually powered up? do you have termination resistors?

Giovanni

yes the transceiver is powered on(3.3v) . and the termination resistors is in the schematic:

Hi ,
I have connect cjmcu-230(SN65HVD23x) with stm32f103cb with flowing connection
http://www.olliw.eu/uploads/uc4h-esc-actuator-diy-build-v02.jpg
then I modified the can test hal example to disable CAN_BTR_LBKM and change the baud-rate

static const CANConfig cancfg = {
CAN ...

Hi all ,

I want to have brushless motor control for small gimbal, I have ( DRV8313 2.5-A Triple 1/2-H BridgeDriver ) with stm32f103,
But I don't have Hal sensor .and i don't know what to do next.

Is there any way to control the motor without Hal sensor?(ex:magnetic encoder)
what is the key to ...

You could try updating the chibios-related files in /src/gos with the attached; probably that's all you need to do. I updated them for Chibi 19, which also uses the version 6 core, but haven't tried them with Chibi 20; so there may be a few more adjustments, but hopefully my changes will point you ...

is there a way to have smart display with STM32F769I discovery touch screen with chibios 20.3 like touchgfx?or anther.

HI
I have STM32F769I discovery and i want to use the touch screen with µGFX .
is there a demo project ?
I have add µGFX to the project , i have also add to the make file doc but i have an "error GOS:unsupported version of chibios" ,i am using chibios 20.3.2 kernal 6.1.2 .
how can i solve this ...

Probably you need to set the alternate function for SPI. Yes, you need to implement those functions if you want card insertion detection.

Giovanni
thanks for fast replay,
i have set spi pin as alternate and i modify the connecting to be from the shell and every thing is fine in one sd card ...

Hi ,
I want to connect sd card with stm32f103c8(Blue Pill) using chibios191 with (RT-STM32F103-OLIMEX_STM32_P103-FATFS)demo.
But it doesn't work. when I test the SPI pin on oscilloscope there is no signal output on it.
I Have tried to disable JTAG (AFIO->MAPR |=AFIO_MAPR_SWJ_CFG_JTAGDISABLE) noting ...

Hi,
I am using chibios203 with (chibi studio gcc 9.0) to build (RT-STM32F103-OLIMEX_STM32_P103-FATFS) from Demo
but I have this problem


14:55:20 **** Build of configuration Default for project RT-STM32F103-OLIMEX_STM32_P103-FATFS ****
make -j8 all
Compiler Options
arm-none-eabi-gcc -c ...

Giovanni wrote:Hi,

Could you update to version 21?

https://osdn.net/projects/chibios/releases/

I think there was a problem with OpenOCD script for the F7 on version 20.

Giovanni

I have updated but the problem still appear .