ChibiOS Free Embedded RTOS

No problem. Just wanted to let you know about these typos.

Thank you for caring about the docs btw.

Another one here:
http://chibios.sourceforge.net/docs3/rt ... a54caecec4 @ Postcondition

"chthdWait" --> "chThdWait"

Oh, and another thing in the comments: "Thhread name"

As far as I understand it shouldn't be chthdExit, but chThdExit[1].

http://www.chibios.org/dokuwiki/doku.ph ... eatethread

[1] http://chibios.sourceforge.net/docs3/rt ... 7a1c3c75ac

A little follow up from here. I looked more into detail around the "alternate function mapping" and noticed that I'm restricted to a GPIO indeed.
However, after adjusting the GPIO and ensuring that WS2812_AF is defined as 2, I still get no input on the (moved) GPIO PA3, which shall be at ARD_D1 ...

Thank you for your quick reply!

I tested yesterday already different GPIO pins including different GPIO bays (GPIOA, GPIOB, ...).
My reference led for the heart beat works fine.

At least from your reply and looking into the board.h, I understand that you believe the GPIO mapping is wrong, right ...

Good morning Giovanni!

Yes, I ensured that the Makefile and configs are taken from the device's demo project in the stable_19.1.x branch.
Additionally, I took some time and commited all changes to a forked repo on Github, so you can see every step I made.

m

Here are the problems I have. After ...

Hello everybody,

based on the WS2812-LED-Driver_ChibiOS [1] project, I would like to control WS2812 leds.
When looking into the reference manual [2] on page 170, I decided to use the following setup:
#define PORT_WS2812 GPIOA // GPIO group
#define PIN_WS2812 1 // GPIO pin in group
#define WS2812 ...