ChibiOS Free Embedded RTOS

Good morning,

Does the I2C driver for the STM32G4 series automatically support CRC checksum?

Best,

Rob

Hi,

It's not working on the STM32F303 either. Should the device be recognized as devttyACM0?

Hi Giovanni,

I am using a Linux PC and GTKTerm. Also, I am connecting the Nucleo board to a USB2 port. Unfortunately, I don't see the shell initialisation statement appearing in the terminal, nor I am able to write anything to it.

I may be able to try with an STM32F303RE Nucleo board tomorrow and ...

Hi,

I am trying the USB_CDC demo code from ChibiOS v21.11.1 (and also on v21.6.0) on an STM32G474RE Nucleo board.

However, the USB appears as devttyACM0 but it's "not active", I can see that from the blinker thread on line 100.

Is there anything that I should be doing from the receiver PC that I ...

Hi everyone,

I am developing some code where I need to use the ChibiOS DAC driver on an STM32G474RE Nucleo Board.

I compiled the ChibiOS_21.6.0/testhal/STM32/multi/DAC for the specific board and uploaded the .bin file to the board, however, nothing appears on the PA4 pin.

Do I need to change some ...

Hi,

I tried to add CONT to CFGR as follows, but I got the same result.

However, I have adc_grp1_buf_depth set to 1.

const ADCConversionGroup porte_adcgrpcfg2 = {
.circular = false,
.num_channels = adc_grp_num_channels,
.end_cb = NULL,
.error_cb = adcerrorcallback,
.cfgr ...

Hi,

I am a new user of ChibiOS and this is my first post here. So, hopefully, I am doing this correctly. If not, please let me know.

I am using a STM32G474VET6 and the ChibiOS version is 20.3.3.

Here is the shell info output:

ch> info
Kernel: 6.1.3
Compiler: GCC 9.2.1 20191025 (release) [ARM ...