Code: Select all
RCC_AHB3ENR_QSPIEN | RCC_AHB3RSTR_QSPIRST
Note that you are mixing constants of 2 different registers here.
Giovanni
Moderators: RoccoMarco, barthess
Code: Select all
RCC_AHB3ENR_QSPIEN | RCC_AHB3RSTR_QSPIRST
Giovanni wrote:I took it from the F7 code.Code: Select all
RCC_AHB3ENR_QSPIEN | RCC_AHB3RSTR_QSPIRST
Note that you are mixing constants of 2 different registers here.
Giovanni
Code: Select all
rccResetAHB4(~(RCC_APB4RSTR_SYSCFGRST | STM32_GPIO_EN_MASK));
andypiper wrote:Code: Select all
rccResetAHB4(~(RCC_APB4RSTR_SYSCFGRST | STM32_GPIO_EN_MASK));
?
Giovanni wrote:Hi,
It is different, a new mini-driver is required.
Giovanni
Giovanni wrote:Sorry, I don't understand your question.
Giovanni
steved wrote:Your driver talks to the WSPI peripheral, which is a fixed entity (OK, maybe there are two, as with serial ports, but same principle).
The board setup file then links the required pins with the WSPI peripheral.
Users browsing this forum: No registered users and 39 guests