Hi.
Why there is no support for STM32F101 MCU in ChibiOS? I wanted to change my F100 in old project by F101 but I can't find how
Are anybody know is STM32F100 binary compatible with STM32F101 MCU. If I simple will use HEX file compilled for STM32F100 in the STM32F101 MCU, will it work?
P.S. I have no STM32F101 now and can't check it myself and I have one day to make the descision.
STM32F101 support
Moderators: RoccoMarco, barthess
- Giovanni
- Site Admin
- Posts: 14457
- Joined: Wed May 27, 2009 8:48 am
- Location: Salerno, Italy
- Has thanked: 1076 times
- Been thanked: 922 times
- Contact:
Re: STM32F101 support
Hi,
F103 examples should work with F101 also, just don't use missing things, F100 is a bit different.
Why bother with the F101 for new designs? it is very old now.
Giovanni
F103 examples should work with F101 also, just don't use missing things, F100 is a bit different.
Why bother with the F101 for new designs? it is very old now.
Giovanni
-
- Posts: 276
- Joined: Mon Sep 24, 2012 3:52 pm
- Location: Donetsk
- Been thanked: 32 times
- Contact:
Re: STM32F101 support
Hi.
All is simple - it is old design. Now STM is OVER! The prices grows up every day. STM32F100 was cost 1$ in end of 2020. Now it cost 5$-10$ and even 20$. I found F101 for good price less then 1$ and want to use it instead of the F100.
And what do You think is good for new design especially for price about 1$?
All is simple - it is old design. Now STM is OVER! The prices grows up every day. STM32F100 was cost 1$ in end of 2020. Now it cost 5$-10$ and even 20$. I found F101 for good price less then 1$ and want to use it instead of the F100.
And what do You think is good for new design especially for price about 1$?
Who is online
Users browsing this forum: No registered users and 40 guests