Hi everyone,
I am developing some code where I need to use the ChibiOS DAC driver on an STM32G474RE Nucleo Board.
I compiled the ChibiOS_21.6.0/testhal/STM32/multi/DAC for the specific board and uploaded the .bin file to the board, however, nothing appears on the PA4 pin.
Do I need to change some configurations before I do that?
Thanks,
Rob
STM32G474 DAC Demo
Moderators: RoccoMarco, barthess
-
Roberto Geografo
- Posts: 7
- Joined: Mon Aug 09, 2021 2:09 pm
- Location: Bristol
- Has thanked: 1 time
-
Giovanni
- Site Admin
- Posts: 14462
- Joined: Wed May 27, 2009 8:48 am
- Location: Salerno, Italy
- Has thanked: 1078 times
- Been thanked: 922 times
- Contact:
Re: STM32G474 DAC Demo
Hi,
A problem has been reported on the DAC driver:
viewtopic.php?f=35&t=6011
You could wait for a fix or try an older version. I will give it a try over weekend.
Giovanni
A problem has been reported on the DAC driver:
viewtopic.php?f=35&t=6011
You could wait for a fix or try an older version. I will give it a try over weekend.
Giovanni
-
Giovanni
- Site Admin
- Posts: 14462
- Joined: Wed May 27, 2009 8:48 am
- Location: Salerno, Italy
- Has thanked: 1078 times
- Been thanked: 922 times
- Contact:
Re: STM32G474 DAC Demo
Hi,
A fix has been committed to 21.11.x and 20.3.x branches on subversion (note not 21.6.x, it is a dead branch, please update).
The fix will be released in 21.11.2 and 20.3.5.
Giovanni
A fix has been committed to 21.11.x and 20.3.x branches on subversion (note not 21.6.x, it is a dead branch, please update).
The fix will be released in 21.11.2 and 20.3.5.
Giovanni
Who is online
Users browsing this forum: Google [Bot] and 10 guests