Hi
I'm using STM32 nucleo f413 board for CAN interface testing.
I've configured the CAN IOs, clock and everything properly. My node is able to receive the data correctly.
But while transmitting, data is getting corrupted. You can see the CAN_TD pin in the below image.
To verify the hardware, I've configured CAN with bare metal, and it is working.
What could be the reason or where should I look to get the issue resolved?
Thankyou.
STM32 nucleo-f413 CAN tx pin twitch
Moderators: RoccoMarco, barthess
- Giovanni
- Site Admin
- Posts: 14444
- Joined: Wed May 27, 2009 8:48 am
- Location: Salerno, Italy
- Has thanked: 1074 times
- Been thanked: 921 times
- Contact:
Re: STM32 nucleo-f413 CAN tx pin twitch
Hi,
I would check GPIO settings 1st. The driver itself just writes the frame in the mailbox.
Giovanni
I would check GPIO settings 1st. The driver itself just writes the frame in the mailbox.
Giovanni
Who is online
Users browsing this forum: Google [Bot] and 27 guests