Hi
I can see back in 2020 support was added for the WB55. Did the drivers to enable interface to ST BLE stack get implemented ?
KR
STM32WB55
Moderators: RoccoMarco, barthess
Re: STM32WB55
FXCoder wrote:Hi,
Only the main core is supported (these is no IPCC, HSEM, CPU2 control, etc.).
--
Bob
Hi Bob,
thanks for the reply, was there any specific reason for not supporting them, or was if more down to time ?
KR
- FXCoder
- Posts: 384
- Joined: Sun Jun 12, 2016 4:10 am
- Location: Sydney, Australia
- Has thanked: 180 times
- Been thanked: 130 times
Re: STM32WB55
Hi KR,
Supporting the WB to work with the proprietary ST stacks on CPU2 is non-trivial.
Nobody has had the time (or need) to do more.
You can look at the STM32CubeWB to get an idea of the requirements if you want to write drivers independently.
https://github.com/STMicroelectronics/STM32CubeWB
--
Bob
Supporting the WB to work with the proprietary ST stacks on CPU2 is non-trivial.
Nobody has had the time (or need) to do more.
You can look at the STM32CubeWB to get an idea of the requirements if you want to write drivers independently.
https://github.com/STMicroelectronics/STM32CubeWB
--
Bob
Who is online
Users browsing this forum: No registered users and 17 guests