UDP receive missing messages
Moderators: tfAteba, barthess, RoccoMarco, lbednarz, utzig
- Giovanni
- Site Admin
- Posts: 14565
- Joined: Wed May 27, 2009 8:48 am
- Location: Salerno, Italy
- Has thanked: 1112 times
- Been thanked: 937 times
- Contact:
Re: UDP receive missing messages
Do you have a MACv1 board to try? (anything except H7).
Not sure how to test this.
Giovanni
Not sure how to test this.
Giovanni
Re: UDP receive missing messages
I might have an F4 based board, but it’s entirely different board (same PHY however)
I could also test on h735 discovery board to rule out HW. This one has different PHY as well.
I could also test on h735 discovery board to rule out HW. This one has different PHY as well.
Re: UDP receive missing messages
Wrote a little testapp that just blocks on a receive and then responds with a message.
Wireshark shows that this works perfectly fine on the h735 discovery board, but shows the same delay issue on my board. Only difference is the phy (DP83848I vs LAN8742A)
I’m thinking hardware issue, but strangely it only affects the receive.
Wireshark shows that this works perfectly fine on the h735 discovery board, but shows the same delay issue on my board. Only difference is the phy (DP83848I vs LAN8742A)
I’m thinking hardware issue, but strangely it only affects the receive.
- Giovanni
- Site Admin
- Posts: 14565
- Joined: Wed May 27, 2009 8:48 am
- Location: Salerno, Italy
- Has thanked: 1112 times
- Been thanked: 937 times
- Contact:
Who is online
Users browsing this forum: No registered users and 7 guests