Renesas RL78G14 Development Kit
Posted: Tue Jul 15, 2014 11:24 am
The RDK has been pre-programmed at the factory with software that includes support for cloud connectivity. When the RDK is connected to an Internet connection through the Ethernet interface, “Cloud Connected” is displayed on the LCD panel (displayed only when a pushbutton switch is pressed), indicating a connection with the cloud has been established. The Renesas RL78G14 RDK is a full featured, wireless-equipped design for the RL78 MCU. A GainSpan GS1011M Wi-Fi module is included on the board and the RL78G14 RDK has cloud connectivity pre-programmed. This project is an IAR Renesas RL78G14 project that using GainSpan wifi module GS1011M to demo Exosite cloud activatation, and cloud connectivity to send and receive data to/from the cloud by using Exosite's Cloud Data Platform.
The project functionality includes:
1) New device activation and save cik to EEPROM.
2) Period send data to draw triangle wave to Exosite cloud.
3) Send adc value and temp to Exosite cloud.
4) Read data source on Exosite cloud.
License is BSD, Copyright 2012, Exosite LLC (see LICENSE file)
Tested and developed ith IAR for RL78 30-day evaluation 1.20.3
For complete information and demo code visit our website http://bit.ly/1qbQd9Z
The project functionality includes:
1) New device activation and save cik to EEPROM.
2) Period send data to draw triangle wave to Exosite cloud.
3) Send adc value and temp to Exosite cloud.
4) Read data source on Exosite cloud.
License is BSD, Copyright 2012, Exosite LLC (see LICENSE file)
Tested and developed ith IAR for RL78 30-day evaluation 1.20.3
For complete information and demo code visit our website http://bit.ly/1qbQd9Z