I've been trying to port my code from F4/F7 (ADCv2) to H7 (ADCv4), and the ADC configuration has changed a lot.
The one that's puzzling me is why there isn't an ADCD2. From the docs, I thought I should be able to run the three STM32H7 ADCs independently, as with the STM32F7. Have I misunderstood the STM documentation?
Mike
STM32H7 ADCv4 configuration
-
- Posts: 166
- Joined: Wed Jan 09, 2019 12:37 pm
- Has thanked: 19 times
- Been thanked: 31 times
- Giovanni
- Site Admin
- Posts: 14457
- Joined: Wed May 27, 2009 8:48 am
- Location: Salerno, Italy
- Has thanked: 1076 times
- Been thanked: 922 times
- Contact:
Re: STM32H7 ADCv4 configuration
Hi,
ADC2 is only supported as slave ADC in dual ADC mode. ADC1 and ADC2 share things like clock enable bits, IRQs etc, it seems to be meant that way.
I have not tried to untangle the two of them.
Giovanni
ADC2 is only supported as slave ADC in dual ADC mode. ADC1 and ADC2 share things like clock enable bits, IRQs etc, it seems to be meant that way.
I have not tried to untangle the two of them.
Giovanni
-
- Posts: 166
- Joined: Wed Jan 09, 2019 12:37 pm
- Has thanked: 19 times
- Been thanked: 31 times
Who is online
Users browsing this forum: No registered users and 34 guests