Timers & TIVA port
Moderator: Marco
Re: Timers & TIVA port
I'm affraid it is not going to work on ChibiOS version 2.6 because there are too many differences between 2.6 and 3. The directory structure is different and the HAL is depending on the OSAL (Operating System Abstraction Layer) which is new in ChibiOS 3.
Re: Timers & TIVA port
Well, let's try to make it work on ChibiOS 3 then...
EDIT: maybe I didn't make that clear, I supposed it was obvious from the fact I was talking about problems AFTER the compilation.
I am using two distinct versions of the stuff, one "vanilla" from ChibiOS-Contrib and one opportunely modified in order to make it work on ChibiOS 2.6,
both of them compile AND do not work, with exactly the same errors.
EDIT: maybe I didn't make that clear, I supposed it was obvious from the fact I was talking about problems AFTER the compilation.
I am using two distinct versions of the stuff, one "vanilla" from ChibiOS-Contrib and one opportunely modified in order to make it work on ChibiOS 2.6,
both of them compile AND do not work, with exactly the same errors.
Re: Timers & TIVA port
Can you try to program the ch.bin file inside the attached zip file? This binary is generated from the RT-TM4C1294-LAUNCHPAD demo.
EDIT: The 'vannilla' version should be working out of the box. I compiled it with GCC version 4.7.4. What compiler are you using?
EDIT: The 'vannilla' version should be working out of the box. I compiled it with GCC version 4.7.4. What compiler are you using?
- Attachments
-
- ch.zip
- RT-TM4C1294-LAUNCHPAD demo
- (17.07 KiB) Downloaded 510 times
-
- Posts: 1
- Joined: Tue Nov 25, 2014 5:52 pm
Re: Timers & TIVA port
The attached .bin works.
The demo also works on gcc 4.8.3 20140820. The problem persists only in our silly port for 2.6.
The demo also works on gcc 4.8.3 20140820. The problem persists only in our silly port for 2.6.
- Giovanni
- Site Admin
- Posts: 14563
- Joined: Wed May 27, 2009 8:48 am
- Location: Salerno, Italy
- Has thanked: 1111 times
- Been thanked: 937 times
- Contact:
Who is online
Users browsing this forum: No registered users and 1 guest