Crossworks 3.0 Project file for STM32F4-Discovery demo

[alexlesuper]

Hello,

I've created a ready-to-use Crossworks project file for the STM32F4-Discovery demo in ChibiOS. This file will not work with any previous version of Rowley Crossstudio.

All you need to do is:

1. Create a directory for the crossworks project: ChibiOS-RT/demos/ARMCM4-STM32F407-DISCOVERY/crossworks
2. Copy the attached project file into that directory.
3. Open the project in Crossworks 3.0 or later

Cheers,

Alex

[Giovanni]

Well done, Crossworks users will appreciate this for sure.

Giovanni

[8bitgeek]

3.0 is not released yet, we're anxiously awaiting it's release. Will it work with 2.3.3? I'll give it a go anyway...will repost if any changes are required.

[peets]

Thanks!

From this information I generated a project for STM32F303Discovery. For details look at https:

https://rowley.zendesk.com/entries/6074 ... with-CW3-2

remains the question:
including "../../../os/ports/GCC/ARMCMx/STM32F1xx/" in place of "../../../os/ports/GCC/ARMCMx/STM32F3xx/"
- STM32F3xx (was used in the corresponding make file);

The F3xx compiles but creates a vector error during setup;

Is there a bug in the vector.c file of "../../../os/ports/GCC/ARMCMx/STM32F3xx/" ?