Demo project for LPC43xx, problem

[Alex]

I am try research Demo project by TheShed. Make this project cause error message :

--------------------------------------------------------------------------------------------------------------
make: *** No rule to make target `build/LPC4357.elf', needed by `all'. Stop.
make: *** Waiting for unfinished jobs....
--------------------------------------------------------------------------------------------------------------

port LPC43xx by TheShed: http://sourceforge.net/p/chibios/svn/6740/
demo by TheShed: http://ehc.ac/p/chibios/svn/6742/tree/t ... IRQ_STORM/


original MakeFile by TheShed give the same results...

in attach my makefile (so little different from original)

[Giovanni]

Hi,

You should verify the Makefile, that happens when some required file is missing, there is an option for make (-d) to enable a verbose mode, that could help you.

Moving this thread in the LPC forum. If you don't get answer there I will give this a try in the weekend.

Giovanni

[Alex]

Excuse me, I'm afraid you forgot about my problem, it is still actual. I hope that you'll answer. Thank you.

[Giovanni]

Yes I forgot... I will try tomorrow. Probably it is an error in some .mk file.

Giovanni

[Alex]

Project archive

[Giovanni]

The project does not compile because the board directory is missing: /boards/NONSTANDARD_LPC4330_SBC/board.mk

Code: Select all

makefile:72: ../../boards/NONSTANDARD_LPC4330_SBC/board.mk: No such file or directory
make: *** No rule to make target `../../boards/NONSTANDARD_LPC4330_SBC/board.mk'
.  Stop.

It is different from what you posted so I don't know if there are more problems, you should contact the maintainer for the missing files and in case there are more problems, try a forum private message.

Giovanni

[Giovanni]

The board files seem to be present if you checkout the latest revision here: svn://svn.code.sf.net/p/chibios/svn/trunk_old

You may try this one.

Giovanni

[Alex]

Good evening.
Thank You very mach. All files of DMA_MEMproject and of LPC43xx port was dowloaded from svn://svn.code.sf.net/p/chibios/svn/trunk_old by Tortoise svn . Project was builded successfully. I am debug project by JLink. Led switch on and switch off. But problems are present. First calling "chThdSleep" causes
Target Halted. Makefile equal original. Linker script was elited for LPC4357.


Linker script
---------------------------------------------------------------------------------------------------------------------------

* LPC4357 setup.
* Code runs from FLASH.
*/
__main_stack_size__ = 0x0800;
__process_stack_size__ = 0x0800;

MEMORY
{
flash : org = 0x1A000000, len = 512k
ram1 : org = 0x10000000, len = 32k
ram2 : org = 0x10080000, len = 40k
ramahb : org = 0x20000000, len = 32k
ramahb2 : org = 0x20008000, len = 16k
ramahb3 : org = 0x2000C000, len = 16k
}

__ram_start__ = ORIGIN(ram2);
__ram_size__ = LENGTH(ram2);
__ram_end__ = __ram_start__ + __ram_size__;

ENTRY(ResetHandler)

SECTIONS
{
. = 0;
_text = .;

startup : ALIGN(16) SUBALIGN(16)
{
__vectors_start = .;
KEEP(*(vectors))
} > flash

constructors : ALIGN(4) SUBALIGN(4)
{
PROVIDE(__init_array_start = .);
KEEP(*(SORT(.init_array.*)))
KEEP(*(.init_array))
PROVIDE(__init_array_end = .);
} > flash

destructors : ALIGN(4) SUBALIGN(4)
{
PROVIDE(__fini_array_start = .);
KEEP(*(.fini_array))
KEEP(*(SORT(.fini_array.*)))
PROVIDE(__fini_array_end = .);
} > flash

.text : ALIGN(16) SUBALIGN(16)
{
*(.text.startup.*)
*(.text)
*(.text.*)
*(.rodata)
*(.rodata.*)
*(.glue_7t)
*(.glue_7)
*(.gcc*)
} > flash

.ARM.extab :
{
*(.ARM.extab* .gnu.linkonce.armextab.*)
} > flash

.ARM.exidx : {
PROVIDE(__exidx_start = .);
*(.ARM.exidx* .gnu.linkonce.armexidx.*)
PROVIDE(__exidx_end = .);
} > flash

.eh_frame_hdr :
{
*(.eh_frame_hdr)
} > flash

.eh_frame : ONLY_IF_RO
{
*(.eh_frame)
} > flash

.textalign : ONLY_IF_RO
{
. = ALIGN(8);
} > flash

_etext = .;
_textdata = _etext;

.stacks :
{
. = ALIGN(8);
__main_stack_base__ = .;
. += __main_stack_size__;
. = ALIGN(8);
__main_stack_end__ = .;
__process_stack_base__ = .;
__main_thread_stack_base__ = .;
. += __process_stack_size__;
. = ALIGN(8);
__process_stack_end__ = .;
__main_thread_stack_end__ = .;
} > ram2

.data :
{
. = ALIGN(4);
PROVIDE(_data = .);
*(.data)
. = ALIGN(4);
*(.data.*)
. = ALIGN(4);
*(.ramtext)
. = ALIGN(4);
PROVIDE(_edata = .);
} > ram2 AT > flash

.bss :
{
. = ALIGN(4);
PROVIDE(_bss_start = .);
*(.bss)
. = ALIGN(4);
*(.bss.*)
. = ALIGN(4);
*(COMMON)
. = ALIGN(4);
PROVIDE(_bss_end = .);
} > ram2
}

PROVIDE(end = .);
_end = .;

__heap_base__ = _end;
__heap_end__ = __ram_end__;

[marcinj7]

Hi,

In makefile you need to change

Code: Select all

# LPC43xx boot select: ram, spifi_flash_debug, flash.
ifeq ($(LPC_BOOT_SELECT),)
  LPC_BOOT_SELECT = ram
endif

to

Code: Select all

# LPC43xx boot select: ram, spifi_flash_debug, flash.
ifeq ($(LPC_BOOT_SELECT),)
  LPC_BOOT_SELECT = flash
endif

[Alex]

Yes!!! My Dear friend, thank you very much! Good luck! My English so bad. I am very glad to see you you! )) so on...