Different start time of two channel on the same TIMER

[jevan]

Hello,
Is it possible to set two channel (i.e. 0 and 1) in the same TIMER, when i need to start the channel1 earlier before the 50%of the duty cycle ends of channel0?
https://drive.google.com/file/d/0B1quj8sV3XPweU9lbmpKekJEdEk/view?usp=sharing

Is there any way to achieve this.
Thanks
BR,
jevan

[Giovanni]

Hi,

All PWM channels are synchronized on the activation front. What you need could be achieved (not sure) using multiple timers in a master/slave configuration but the driver does not support this.

See the TIM documentation on the STM32 Reference Manual.

Giovanni

[jevan]

Thanks Giovanni