Hi,
I need to use external flash memory connected through SPI to an STM32F429. The nand flash memory is made by Spansion.
[url]
https://www.spansion.com/Support/Datash ... 27S_00.pdf
[/url]
I found a very promising example inside the demo ARMCM3-STM32F103-FATFS of chibiOS 2.6.9, even if I'm using latest version 3.0.2.
Is the abstraction made from fats enough to use this memory (or is the way to control the memory through SPI the same for every memory? since the above manual is 141 pages long....)
Thanks.
fatfs with nand over SPI
Moderator: RoccoMarco
-
enrico.dallavia
- Posts: 105
- Joined: Thu Mar 12, 2015 10:15 am
- Has thanked: 2 times
- Giovanni
- Site Admin
- Posts: 14893
- Joined: Wed May 27, 2009 8:48 am
- Has thanked: 1202 times
- Been thanked: 997 times
-
enrico.dallavia
- Posts: 105
- Joined: Thu Mar 12, 2015 10:15 am
- Has thanked: 2 times
Re: fatfs with nand over SPI
Thanks. You save me a lot of time.
So "any" nand flash which supports erasable in blocks of 512 bytes is eligible to be used with fats?
So "any" nand flash which supports erasable in blocks of 512 bytes is eligible to be used with fats?