STM32 SPiv1 Driver

[MobileWill]

I am using the Makefile via Embitz and it can't find the declaration of

osalDbgAssert

Which I can't figure out why. The makefile includes osal.mk which has the declaration of it.

What am I missing?

[MobileWill]

So strange the same project doesn't get this error in Eclipse. Hmm.

[MobileWill]

So i reverted to the version that comes with ChibiOS Studio and all the errors I had are gone. So its an issue with 16.1.3.

[Giovanni]

So i reverted to the version that comes with ChibiOS Studio and all the errors I had are gone. So its an issue with 16.1.3.

In which demo?

Giovanni

[MobileWill]

The one complaining about osalDbgAssert being undefined. The other was about this line but Idk if it was related to OS version or Embitz but it shouldn't matter since I am using makefile.

palSetPadMode(GPIOA, 15, PAL_MODE_INPUT | PAL_STM32_PUDR_FLOATING);

[Tectu]

The one complaining about osalDbgAssert being undefined. The other was about this line but Idk if it was related to OS version or Embitz but it shouldn't matter since I am using makefile.
palSetPadMode(GPIOA, 15, PAL_MODE_INPUT | PAL_STM32_PUDR_FLOATING);

As far as I can tell PAL_STM32_PUDR_FLOATING is not a valid/available macro in ChibiOS/HAL 4.0.3. You might want to use this one instead (untested!):

Code: Select all

palSetPadMode(GPIOA, 15, PAL_MODE_INPUT | PAL_MODE_INPUT_PULLUP);

Regarding the issue with: It seems that in the file \os\hal\ports\STM32\LLD\SPIv1\spi_lld.c all osalDgbAssert() should be replaced with chDbgAssert(). But again: Not sure. I haven't worked a lot with the new ChibiOS version so far.


~ Tectu

[Giovanni]

PAL_MODE_INPUT_PULLUP is sufficient.

Giovanni