I changed the GPL code in Eclipse 2.0, rewrite all of that is not an option.
Giovanni
Debug plugin with DSF support
- Giovanni
- Site Admin
- Posts: 14457
- Joined: Wed May 27, 2009 8:48 am
- Location: Salerno, Italy
- Has thanked: 1076 times
- Been thanked: 922 times
- Contact:
- Giovanni
- Site Admin
- Posts: 14457
- Joined: Wed May 27, 2009 8:48 am
- Location: Salerno, Italy
- Has thanked: 1076 times
- Been thanked: 922 times
- Contact:
Re: Debug plugin with DSF support
Those interested can find a temporary version here: http://www.chibios.org/eclipse/chibistudio_test
Some notes:
1) You need to set "DSF" as debug mode for GDM Hardware Debug, see debug preferences. This is a per-workspace setting.
2) You need to click on the "debug task" in the debug perspective before clicking the refresh button in the ChibiOS view (looking into this).
3) If using a recent Eclipse you need to edit debug configuration and set "OpenOCD (via Socket)" instead of "Generic TCP/IP" in the debugger tab.
I tested with both Luna and the latest Eclipse and it appears to work except for the points above.
Giovanni
Some notes:
1) You need to set "DSF" as debug mode for GDM Hardware Debug, see debug preferences. This is a per-workspace setting.
2) You need to click on the "debug task" in the debug perspective before clicking the refresh button in the ChibiOS view (looking into this).
3) If using a recent Eclipse you need to edit debug configuration and set "OpenOCD (via Socket)" instead of "Generic TCP/IP" in the debugger tab.
I tested with both Luna and the latest Eclipse and it appears to work except for the points above.
Giovanni
- wurstnase
- Posts: 121
- Joined: Tue Oct 17, 2017 2:24 pm
- Has thanked: 43 times
- Been thanked: 30 times
- Contact:
Re: Debug plugin with DSF support
It's working with 2019-03 and 2019-06 on my linux mate.
Thanks!
P.S.: Can't find any options for "DSF" or similar.
Thanks!
P.S.: Can't find any options for "DSF" or similar.
\o/ Nico
- Giovanni
- Site Admin
- Posts: 14457
- Joined: Wed May 27, 2009 8:48 am
- Location: Salerno, Italy
- Has thanked: 1076 times
- Been thanked: 922 times
- Contact:
Re: Debug plugin with DSF support
wurstnase wrote:Can't find any options for "DSF" or similar.
That option is only present up to "Mars", newer versions have a single debug launcher.
Giovanni
- wurstnase
- Posts: 121
- Joined: Tue Oct 17, 2017 2:24 pm
- Has thanked: 43 times
- Been thanked: 30 times
- Contact:
Re: Debug plugin with DSF support
Giovanni wrote:wurstnase wrote:Can't find any options for "DSF" or similar.
That option is only present up to "Mars", newer versions have a single debug launcher.
Thanks for clarification.
\o/ Nico
- wurstnase
- Posts: 121
- Joined: Tue Oct 17, 2017 2:24 pm
- Has thanked: 43 times
- Been thanked: 30 times
- Contact:
Re: Debug plugin with DSF support
Do I need any special font for this plugin?
I just setup my complete computer and have now a pretty clean installation with Ubuntu Mate and Eclipse.
Last time I can read anything, but now I get squares:
I just setup my complete computer and have now a pretty clean installation with Ubuntu Mate and Eclipse.
Last time I can read anything, but now I get squares:
\o/ Nico
- Giovanni
- Site Admin
- Posts: 14457
- Joined: Wed May 27, 2009 8:48 am
- Location: Salerno, Italy
- Has thanked: 1076 times
- Been thanked: 922 times
- Contact:
Re: Debug plugin with DSF support
Hi,
I think no, I created the Mint VM from scratch and I installed no extra fonts. Mint is derived by Ubuntu so I think it is the same.
It is no different from the previous plugin regarding fonts anyway.
Giovanni
I think no, I created the Mint VM from scratch and I installed no extra fonts. Mint is derived by Ubuntu so I think it is the same.
It is no different from the previous plugin regarding fonts anyway.
Giovanni
- wurstnase
- Posts: 121
- Joined: Tue Oct 17, 2017 2:24 pm
- Has thanked: 43 times
- Been thanked: 30 times
- Contact:
Re: Debug plugin with DSF support
Hmmm...
The complete window is somehow
The rest in eclipse is working as expected.
The complete window is somehow
The rest in eclipse is working as expected.
\o/ Nico
- Giovanni
- Site Admin
- Posts: 14457
- Joined: Wed May 27, 2009 8:48 am
- Location: Salerno, Italy
- Has thanked: 1076 times
- Been thanked: 922 times
- Contact:
Re: Debug plugin with DSF support
Look for a microsoft fonts package, maybe courier new is not installed by default.
Giovanni
Giovanni
- wurstnase
- Posts: 121
- Joined: Tue Oct 17, 2017 2:24 pm
- Has thanked: 43 times
- Been thanked: 30 times
- Contact:
Who is online
Users browsing this forum: No registered users and 24 guests