ChibiOS Free Embedded RTOS

F3 must use SPIv2, adjust the path.

Please refer to the F3's platform.mk in order to understand what the correct paths are, each STM32 is different.

Giovanni

Thank you
Well I finally could get rid of all errors but the code doesn't seem to be downloaded to the board :/
Is there anything else that I must enable in the halconf.h file?

Code loading is not related to OS settings.

Play with the IAR options.

Giovanni

Well I managed to get rid of all errors finally
But when I download the code it just doesn't run on the board.. I was using the demo main.c provided for the STM32F3 Discovery board.
That's awkward..

The project contains several settings that should be modified in the linker section, note that F3 and F4 have different RAM sizes, you need to change some addresses/sizes there.

You should also be able to debug, does the program at least enter the main function?

Giovanni

No it doesn't enter the main function,In fact I can't even debug step by step ..

Thank you Giovani I really appreciate your help and especially your patience
I got it working finally.
I realised tha I missed out on those settings.

Good, please look all the tabs in the linker section and compare with the F4 project.

Giovanni