Thank you for following up on this issue!
I can confirm that the timing is still off. chThdSleepMilliseconds(1000) seems to delay for 500ms.
-Chad Coates
STM32F446RE demo has a timing issue Topic is solved
- Giovanni
- Site Admin
- Posts: 14893
- Joined: Wed May 27, 2009 8:48 am
- Has thanked: 1202 times
- Been thanked: 997 times
Re: STM32F446RE demo has a timing issue
Thanks Giovanni!
It looks like that fixed it. chThdSleepMilliseconds(1000) is now behaving as expected.
It looks like that fixed it. chThdSleepMilliseconds(1000) is now behaving as expected.
- Giovanni
- Site Admin
- Posts: 14893
- Joined: Wed May 27, 2009 8:48 am
- Has thanked: 1202 times
- Been thanked: 997 times
Re: STM32F446RE demo has a timing issue
Hi,
It did not fix it, it just proved that the problem is in the ST driver when a TIM is used.
Next week I should be able to get an F446 board.
Giovanni
It did not fix it, it just proved that the problem is in the ST driver when a TIM is used.
Next week I should be able to get an F446 board.
Giovanni
- Giovanni
- Site Admin
- Posts: 14893
- Joined: Wed May 27, 2009 8:48 am
- Has thanked: 1202 times
- Been thanked: 997 times
Re: STM32F446RE demo has a timing issue
Fixed it, it was a wrong DKCFGR register initialization.
Giovanni
Giovanni
-
heliochronix
- Posts: 34
- Joined: Thu Aug 31, 2017 6:32 pm
- Has thanked: 8 times
- Been thanked: 6 times
Re: STM32F446RE demo has a timing issue
Thank you Giovanni for following up on this!Confirming that trunk@12551 solved this issue.