Page 3 of 3

Re: Introducing ChibiCube

Posted: Sun Feb 02, 2014 10:00 am
by unicondor
Great project,

Is a OpenSource project?

Where I can get documentation about build cube and/or controller circuit??

Thanks so much

Flavio

Re: Introducing ChibiCube

Posted: Sun Feb 02, 2014 12:12 pm
by Giovanni
Hi,

I'll ask to put the design and the SW on SF, stay tuned. Those who will be at Embedded World will be able to see the cubes at the ST distributors stands.

Giovanni

Re: Introducing ChibiCube

Posted: Sun Feb 02, 2014 5:23 pm
by Tectu
Did you guys finally find the time to create some touchscreen remote to control the cube? :oops:


~ Tectu

Re: Introducing ChibiCube

Posted: Sun Feb 02, 2014 5:39 pm
by Giovanni
Don't know about touch interface.

Cube 2.0 has a daughter board where an STM32F3-Discovery or an SPC56D-Discovery can be plugged (and a serial interface). It is also mostly SMD now, no more TO220 PNPs.

The SW now is also able to drive 256 levels of luminosity independently on each LED.

http://www.youtube.com/watch?v=YSS0lpYwRKg

In the video there is old version, the new one has a blue PCB and a Plexiglas case.

Giovanni

Re: Introducing ChibiCube

Posted: Thu Feb 06, 2014 4:51 pm
by RoccoMarco
unicondor wrote:Great project,

Is a OpenSource project?

Where I can get documentation about build cube and/or controller circuit??

Thanks so much

Flavio


Hi Flavio,
I have created a new thread (heedlessly). It 's all here.

ChibiCube v2.0