ChibiOS Free Embedded RTOS

Posted: **Fri Jan 08, 2021 1:24 pm**

Giovanni and Bob,

I've been continue polishing the STM32WB support and attached a new portion of patches. They are suppose to be applied on top of the patches from the previous tarball (STM32WBxx-b4186f.zip). They are ready for review.

Summary of commit messages:

Code: Select all

* 0003 STM32WB: fix style errors

* 0004 STM32WB: update ADC1 in ADCv3

  * Add STM32_ADC_ADC1_PRESC
  * Remove ADC_DMA_MDMA as not supported
  * Change the default value of STM32_ADCSEL to STM32_ADCSEL_SYSCLK

* 0005 STM32WB: update mcuconf STM32WB55XX template

  * Removed STM32_MSISRANGE and STM32_SWPMI1SEL as not supported
  * Updated STM32_HSI16_ENABLED, STM32_HSI48_ENABLED, STM32_LSE_ENABLED
    and STM32_SW to their default values according to STM32WBxx/hal_lld.h
  * Added STM32_C2HPRE and STM32_SHDHPRE parameters
  * Fixed STM32_IRQ_EXTI17_PRIORITY parameters name
  * Added STM32_IRQ_EXTI18_PRIORITY
  * Updated ADC parameters:
    * Removed STM32_ADC_DUAL_MODE as not supported
    * Added STM32_ADC_ADC1_IRQ_PRIORITY and removed ADC12 and ADC3
    * Added STM32_ADC_ADC1_CLOCK_MODE and removed ADC123
    * Added STM32_ADC_ADC1_PRESC and removed ADC123
  * Regenerated STM32WB55_MCUCONF mcuconf files (TODO USB board)

* 0006 STM32WB: update stm32wbxx board schema

  * Return LSEBypass and remove unsupported HSEBypass

Best regards,
Ilya.

Posted: **Sun Jan 10, 2021 12:57 am**

Hi Ilya,
I get a bad zip format from the attachment.
--
Bob

Posted: **Sun Jan 10, 2021 9:41 am**

Hi Bob,

Thank you for taking a look. I've tried to download and open them, however got an error too. I made a new tarball with both sets of patches and attached it. Can you please try one more time?

Best regards,
Ilya.

Posted: **Tue Jan 12, 2021 9:43 am**

Hi,

Patches committed. I modified the order of checks for USB addresses, USB_BASE in WB headers is spurious and will probably be removed in newer header versions. It must be a leftover of some other device.

Giovanni

Posted: **Sat Jan 16, 2021 9:44 pm**

Hi Giovanni,

Thank you for accepting those patches! I've attached another portion of clean up patches which are ready for review. Here is their commit message summary:

Code: Select all

* 0001 STM32WB: update board templates

  * Update ST_NUCLEO48_WB55CG_USB
    * BUTTON is located at GPIOA/10
    * Regenerate board and mcuconf files

  * Cosmetic changes:
    * Use tabs instead of a mixture of spaces and tabs in XMLs
    * Put port IDs at the first place
    * Organize each port parameter on a separate line

* 0002 STM32WB: Add USB_CDC for STM32WB55RC Nucleo USB

* 0003 STM32WB: remove hal_efl_lld previous copied from STM32L4xx

Best regards,
Ilya.

Posted: **Sun Jan 17, 2021 5:37 am**

Hi,

Please no tabs anywhere, convert everything to spaces.

Giovanni

Posted: **Mon Jan 18, 2021 12:54 am**

Hi,

I've moved from using tabs in XML files to spaces, you can find updated previous patches in the attachment.

Best regards,
Ilya.

Posted: **Mon Jan 18, 2021 12:33 pm**

Hi Bob,

However the WB55 differences also extend to PLLSAI1N_VALUE which can be 4 and so below the limit currently used in stm32_pllsai1.inc.

I was trying to open your patch attached in pllsail.inc.zip, however I was not able to open it because of an unpacking error. Could you please reupload it?

Best regards,
Ilya.

Posted: **Mon Jan 18, 2021 1:11 pm**

Hi Ilya,
See if this one opens OK.
--
Bob

Posted: **Tue Jan 19, 2021 12:41 pm**

The problem with attachments should be resolved now, it was caused by issue caused by the phpbb migration. All previous attachments should be restored.

Giovanni

ChibiOS Free Embedded RTOS

STM32WB55 support

Re: STM32WB55 support

Re: STM32WB55 support

Re: STM32WB55 support

Re: STM32WB55 support

Re: STM32WB55 support

Re: STM32WB55 support

Re: STM32WB55 support

Re: STM32WB55 support

Re: STM32WB55 support

Re: STM32WB55 support