Page 1 of 3

Introducing ChibiCube

Posted: Fri Jul 12, 2013 6:35 pm
by Giovanni
Created by a group of students under training with me as tutor...

[youtube]sfOqVOYLyAw[/youtube]

Thanks to Antonio and RoccoMarco that are spending time building one for me too :)

Updates will follow.

Giovanni

Re: Introducing ChibiCube

Posted: Fri Jul 12, 2013 7:01 pm
by Tectu
Thanks for sharing :D
Is it an RGB one? Clearly you should add a touchscreen (remote)control :ugeek:


~ Tectu

Re: Introducing ChibiCube

Posted: Fri Jul 12, 2013 7:23 pm
by Giovanni
They are thinking to an RGB one with PWM drive for each channel, this one is monochrome but pretty cheap and smart, it is driven by an SPI and each board can drive a matrix of 8x8x16, the boards can be chained so with 4 boards you can do a 16x16x16.

Giovanni

Re: Introducing ChibiCube

Posted: Fri Jul 12, 2013 7:33 pm
by Tectu
Sounds good!
I just remember how I did a 4x4x4 monochrome LED cube back the days when I was young with some ATmega16... jesus that was nasty :D


~ Tectu

Re: Introducing ChibiCube

Posted: Fri Jul 12, 2013 9:14 pm
by RoccoMarco
It's a pleasure for us to build this cube. Really, i was been waiting for the start of this topic by cube's owner. Now we can spam about it :twisted: . We are going to build the third floor this night. We are building very slowly in order to check the right orientation of leds and to ensure the same distance between all of them.

Right now there is no much to see as the source code is very simple to help during assembly...

Image Image Image Image Image Image Image

Re: Introducing ChibiCube

Posted: Sat Jul 13, 2013 9:35 am
by Giovanni
Good work :)

Hey Tectu, why don't you add support for 3D displays to GFX :D that would be a first for sure.

Giovanni

Re: Introducing ChibiCube

Posted: Sat Jul 13, 2013 1:04 pm
by Tectu
Giovanni wrote:Hey Tectu, why don't you add support for 3D displays to GFX :D that would be a first for sure.

Lol, I just wanted to suggest that! :D
I mean how fancy would that be... a 16x16x16 RGB cube and you can dump animated .gif images on it :D


@RoccoMarco: Thanks for dumping images, please keep doing that, it's always nice to watch things like that :)
Maybe you want to use some piece of wood, bore the holes for the LEDs in it so you have a nice template to create layer by layer. That's how I did it back then. Here's some illustration.


~ Tectu

Re: Introducing ChibiCube

Posted: Sat Jul 13, 2013 4:06 pm
by RoccoMarco
Hi dear,
assemble a floor at once could create difficulties to keep floors at same distance. We build it line by line ensuring that all led centers are distanced equally from first near. I like 3d display idea :mrgreen:.
I'm building third floor but i have to finish this boring thesis by this evening, so this night i'll continue the funny work :)

Image Image

Re: Introducing ChibiCube

Posted: Sun Jul 14, 2013 1:40 am
by RoccoMarco
growing up: third floor

Image Image Image Image Image Image Image Image Image Image Image Image

Re: Introducing ChibiCube

Posted: Sun Jul 14, 2013 10:26 am
by Tectu
That green table top lamp distracts me a lot :geek:


~ Tectu