ChibiOS Free Embedded RTOS

Hello,

I've created a Crossworks IDE project file (v3.0 beta) that compiles/runs/debugs the demo project that is already in the 2.6.0 stable. Is there a way I can contribute to the project by submitting the file to the trunk in some way?

Thanks,

Alex

Hi,

The best thing to do is to zip a complete example project and make a post in the "contributions" forum.

Giovanni

Looks like there are already people interested: viewtopic.php?f=16&t=1474


~ Tectu

Thanks Alex; helped me a lot; my experience:
- downloaded ChibiOS 2.6.6, installed in ~/Documents/CW3Projects/ChibiOS_2.6.6
- copied your file in ~/Documents/CW3Projects/ChibiOS_2.6.6/demos/ARMCM4-STM32F407-DISCOVERY/crossworks
- started CrossWorks 3.2 and opend ch.hzp
- Build error: dac.c and i2s.c in Project Explorer /Sourcefiles/hal folder could not be found (were missing in the downloades sample of ChibiOS)
-> after tagging these files with "Exclude from build" the demo compiled out of the box.
concluseion: works fine with different workspace path;
question: where do dac.c and i2s.c come from? (don't need them now, just for completion)

Peets

Hi,

There should not be dac.c and i2s.c in version 2.6.6.

Giovanni