ChibiOS Free Embedded RTOS

Hello,

I've created a ready-to-use Crossworks project file for the STM32F4-Discovery demo in ChibiOS. This file will not work with any previous version of Rowley Crossstudio.

All you need to do is:

1. Create a directory for the crossworks project: ChibiOS-RT/demos/ARMCM4-STM32F407-DISCOVERY/crossworks
2. Copy the attached project file into that directory.
3. Open the project in Crossworks 3.0 or later

Cheers,

Alex

Well done, Crossworks users will appreciate this for sure.

Giovanni

3.0 is not released yet, we're anxiously awaiting it's release. Will it work with 2.3.3? I'll give it a go anyway...will repost if any changes are required.

Thanks!

From this information I generated a project for STM32F303Discovery. For details look at https:

https://rowley.zendesk.com/entries/6074 ... with-CW3-2

remains the question:
including "../../../os/ports/GCC/ARMCMx/STM32F1xx/" in place of "../../../os/ports/GCC/ARMCMx/STM32F3xx/"
- STM32F3xx (was used in the corresponding make file);

The F3xx compiles but creates a vector error during setup;

Is there a bug in the vector.c file of "../../../os/ports/GCC/ARMCMx/STM32F3xx/" ?