<stdio.h> unresolved inclusion CibiStudio

bezmic · Post by **bezmic** » Fri Mar 07, 2014 9:16 pm

Hello,

In CibiStudio:
I'm get "unresolved inclusion" message with ignoring of "#include <stdio.h>". But "#include <C:\ChibiStudio\tools\GNU Tools ARM Embedded\4.7 2013q2\arm-none-eabi\include\stdio.h>" wirking. What i do incorrectly ?

Post by **Giovanni** » Fri Mar 07, 2014 9:40 pm

If you want to make that warning disappear you need to add the standard headers paths to the project options.

The warnings are harmless and do not affect normal operations.

Giovanni

bezmic · Post by **bezmic** » Fri Mar 07, 2014 9:52 pm

Thankee for your regard. And this one problem:

Haw can i set odd parity in USART driver? UARTConfig.cr1 |= (USART_CR1_PS | USART_CR1_PCE) don't working for me.

Post by **Giovanni** » Fri Mar 07, 2014 9:57 pm

Probably you also have to enable the 9 bits mode.

Giovanni

ChibiOS Free Embedded RTOS

<stdio.h> unresolved inclusion CibiStudio

<stdio.h> unresolved inclusion CibiStudio

Re: <stdio.h> unresolved inclusion CibiStudio

Re: <stdio.h> unresolved inclusion CibiStudio

Re: <stdio.h> unresolved inclusion CibiStudio