ChibiOS Free Embedded RTOS

Hi!

This is small simple demo and board files for HY-STM32 development board.


Description:

• CPU: STM32F103VET6(ARM Cortex-M3), LQFP100; FLASH: 512K Bytes, SRAM: 64K Bytes
• 1 x JTAG debug interface
• 4 X Status LED, ONE Power LED
• 1 X RS232, supports 3-wire ISP.
• 1 X USB2.0 SLAVE device interface.
• 1 X USB to serial Converter, based on PL2303-HX.
• 1 X Micro SD (TF) card socket, interface with SDIO connection mode.
• 1 X 2.4-inch TFT (240X320 ILI9325 (with touch panel IC ADS7843) interface, can be controlled via MCU, FSMC 16-bit interface mode.
• 1 X SPI bus control M25P16 (16MB) serial Flash to store your data, like picture, character and so on!
• 4 X User buttons
• 1 x RTC with battery back-up battery holder(Battery is included).
• Important GPIO port Lead out, convenient for your Application!
• Board Size: 105MM X 79MM

µGFX demo in future...

Good work, moved in the Contributions forum.

Giovanni

Good work indeed! Now let's see if we can work out the distorted image problem with the LCD


~ Tectu