ChibiOS Free Embedded RTOS

Could anyone help me with this?

This could help you: http://www.chibios.org/dokuwiki/doku.ph ... _new_board

Giovanni

tks for the link. however, I got this error and havent found the solution

Does that happens compiling one of the existing Keil examples?

If not, there are LOTS of settings to do in the project options, please examine one of the examples and make sure to make the same settings in your project.

Giovanni

it happens when I compile the demo. I keep all settings the same

Please restore the project files from the downloaded zip, I am unable to reproduce the problem here, also specify which demo are you trying and the ChibiOS version.

Giovanni

I'm using the demo ARMCM3-STM32F107 and Chibi 2.6.3

It compiles using Keil 5.0. It is possible you changed some setting, could you restore the demo from the zip file and try again?

Giovanni

I succeeded in compiling with uvision 5 but failed to download the program to the board. And I want to write a program to display sth on the display. Could you give me some suggestions on these concerns?

Hi,

You have to setup your debugger (and flasher) in the project options, it depends on the debugger you are using.

Giovanni