Page 1 of 1
USB communication
Posted: Wed Jul 23, 2014 2:57 pm
by Pask
i need to send adn receive data over usb. how i can do it?
Re: USB communication
Posted: Wed Jul 23, 2014 3:18 pm
by Giovanni
A good starting point would be looking at the provided demos.
Giovanni
Re: USB communication
Posted: Wed Jul 23, 2014 4:07 pm
by Pask
What demos? I need a simple example with usb communication.
Re: USB communication
Posted: Wed Jul 23, 2014 5:15 pm
by skute
Pask wrote:What demos? I need a simple example with usb communication.
Not to be rude, but Giovanni's advice was fairly straightforward. Have you downloaded the latest stable release from sourceforge or svn? Have you browsed the contents the release? Perhaps the demo's are kept in the 'demos' directory?
Re: USB communication
Posted: Wed Jul 23, 2014 6:41 pm
by Giovanni
USB is not simple, demos are as close to a minimal example as possible. Like skute suggested, you should give a look among the demos or the test applications under ./testhal.
The distribution includes pretty much all the examples available.
Giovanni