EXT and SerialDriver Compatibility
Posted: Mon Mar 09, 2015 10:25 pm
How can ChibiOS SerialDriver and EXTI be used simultaneously?
I can initialize and use the sd driver just fine:
But then when I initialize EXT the sd reception stops working correctly:
Should I modify the EXTConfig somehow to make it work?
EDIT: I should mention I'm on Chibios 2.7 using STM32F103.
EDIT: I have narrowed the problem down to nvicEnableVector(EXTI15_10_IRQn,CORTEX_PRIORITY_MASK(STM32_EXT_EXTI10_15_IRQ_PRIORITY)); in ext_lld_exti_irq_enable().
This should be setting EXTI15_10 and not interfering with USART3 which is right above it in IRQ position. Could be a bug in the nvic macros?
Thanks,
Chris
I can initialize and use the sd driver just fine:
Code: Select all
+ 52 sdStop(DBG_CONSOLE_DRIVER);
+ 53 sdStart(DBG_CONSOLE_DRIVER, &DbgConsoleCfg);
But then when I initialize EXT the sd reception stops working correctly:
Code: Select all
45 void EXT_Init()
46 {
47 extStart(&EXTD1, &extcfg);
48 extChannelEnable(&EXTD1, 17);
49 extChannelEnable(&EXTD1, 11);
50 }Should I modify the EXTConfig somehow to make it work?
EDIT: I should mention I'm on Chibios 2.7 using STM32F103.
EDIT: I have narrowed the problem down to nvicEnableVector(EXTI15_10_IRQn,CORTEX_PRIORITY_MASK(STM32_EXT_EXTI10_15_IRQ_PRIORITY)); in ext_lld_exti_irq_enable().
This should be setting EXTI15_10 and not interfering with USART3 which is right above it in IRQ position. Could be a bug in the nvic macros?
Thanks,
Chris