Page 1 of 1
How to trigger the ADC with capture/compare event of TIM2?
Posted: Thu Jun 18, 2015 8:35 am
by neums
Hello,
i am working with the STM32F303CC. I want to trigger the ADC with the capture/compare event of the TIM2, but i don't know exactly how to initialize/configure the ADC/Timer
Code: Select all
const ADCConversionGroup adcgrpcfg1 = {
TRUE,
ADC_GRP1_NUM_CHANNELS,
NULL,
NULL,
ADC_CFGR_EXTSEL_SRC(3) | ADC_CFGR_EXTEN_RISING, // CFGR
ADC_TR(0, 4095), // TR1
0, // CCR ADC_CCR_DELAY(4) | ADC_CCR_CKMODE_AHB_DIV2
{ // SMPR[2]
ADC_SMPR1_SMP_AN7(ADC_SMPR_SMP_601P5),
0
},
{ // SQR[4]
ADC_SQR1_SQ1_N(ADC_CHANNEL_IN7),
0,
0,
0
}
};
static const GPTConfig gpt2cfg1 = {
frequency: 100000U,
callback: NULL,
};
i call it with
Code: Select all
adcStart(&ADCD1, NULL);
adcStartConversion(&ADCD1, &adcgrpcfg1, adc_buffer, ADC_GRP1_BUF_DEPTH);
GPTD2.tim->EGR = STM32_TIM_EGR_CC2G
GPTD2.tim->CCMR1= STM32_TIM_CCMR1_OC2CE | STM32_TIM_CCMR1_OC2M(6)
gptStart(&GPTD2, &gpt2cfg1);
gptStartContinuous(&GPTD2, time);
Is there a specific order for calling the Driver? Are the configurations correct?
Re: How to trigger the ADC with capture/compare event of TIM
Posted: Thu Jun 18, 2015 9:16 am
by Giovanni
Hi,
I can't test it right now but few notes:
1) You cannot change the TIM registers before gptStart() because the timer clock is off.
2) The trigger source should be TIM2 TRGO (4), CC2 is not used by the GPT driver so it cannot trigger anything.
Version 3.0 has in the GPT configuration structure the settings for extra registers so there is no need to write registers manually, the DAC demo has an example of GPT with TRGO triggering, you may use the same code.
Giovanni
Re: How to trigger the ADC with capture/compare event of TIM
Posted: Thu Jun 18, 2015 10:53 am
by neums
Hi Giovanni,
thank you a lot for support. I used TRGO now and solved the problem:
Code: Select all
static const GPTConfig gpt2cfg1 = {
frequency: 100000U,
callback: NULL,
cr2: TIM_CR2_MMS_1, /* MMS = 010 = TRGO on Update Event. */
dier: 0U
};
static void adc1_isr(ADCDriver *adcp, adcsample_t *buffer, size_t n)
{
dac_buffer[0] = adc_buffer[0];
palTogglePad(GPIOE, GPIOE_LED1);
}
const ADCConversionGroup adcgrpcfg1 = {
TRUE,
ADC_GRP1_NUM_CHANNELS,
adc1_isr,
NULL,
ADC_CFGR_EXTSEL_SRC(11) | ADC_CFGR_EXTEN_RISING | ADC_CFGR_DISCNUM_VAL(1) | ADC_CFGR_DISCEN_ENABLED, // CFGR
ADC_TR(0, 4095), // TR1
0, // CCR ADC_CCR_DELAY(4) | ADC_CCR_CKMODE_AHB_DIV2
{ // SMPR[2]
ADC_SMPR1_SMP_AN7(ADC_SMPR_SMP_7P5),
0
},
{ // SQR[4]
ADC_SQR1_SQ1_N(ADC_CHANNEL_IN7),
0,
0,
0
}
};
Start the timer with fpr getting a samling rate of 10kHz:
Code: Select all
gptStart(&GPTD2, &gpt2cfg1);
gptStartContinuous(&GPTD2, 10);
Start the ADC:
Code: Select all
adcStart(&ADCD1, NULL);
adcStartConversion(&ADCD1, &adcgrpcfg1, adc_buffer, ADC_GRP1_BUF_DEPTH);
with ADC_GRP1_BUF_DEPTH == 1 in my case. The programm is breakable with the debugger in adc1_isr. I measured the toggling LED in adc1_isr with an oscilloscope and verified the sampling rate.
Re: How to trigger the ADC with capture/compare event of TIM
Posted: Thu Jun 18, 2015 11:16 am
by Giovanni
Great
Giovanni
Re: How to trigger the ADC with capture/compare event of TIM
Posted: Thu Nov 05, 2015 11:46 am
by neums
Hi,
when i trigger the ADC with TRGO of timer 2 then one non expected trigger interrupt is generated when the timer gets started with gptStartContinuous(). I expected that the interrupt occurs when the timer have an overflow. Is there a possibility to eliminate this first interrupt? Or is it possible to enable the capture and compare trigger event of the timer2? I don't see this in the driver. Is there a purpose to implement the capture&compare function?
Re: How to trigger the ADC with capture/compare event of TIM
Posted: Thu Nov 05, 2015 12:40 pm
by Giovanni
It could be a problem in the GPT driver, maybe there is some status to reset. Putting this in queue, it is quite filled right now...
Giovanni
Re: How to trigger the ADC with capture/compare event of TIM
Posted: Thu Nov 05, 2015 2:18 pm
by neums
Thanks,
and the Capture&Compare trigger functionality?
Re: How to trigger the ADC with capture/compare event of TIM
Posted: Thu Nov 05, 2015 2:26 pm
by Giovanni
That could be done using the PWM driver but I never tested it.
Giovanni