ChibiOS Free Embedded RTOS

Posted: **Thu Jul 09, 2015 2:19 pm**

Hi all!

I have started a new project using an STM32F105RCT6, but I am unable to find the linker files and an example mcuconf.h for it.
There is for F103 and F107, but nothing for F105?

I am quite sure it is supported, so I must be missing something.
Could someone please point me in the correct direction?

Thanks!

Posted: **Thu Jul 09, 2015 3:15 pm**

Yeah, i might also add that there doesnt seem to bee any board.h file that can be used for the F1 line of processors. At least not as good as those in the F4 line.

Posted: **Thu Jul 09, 2015 3:29 pm**

Hi,

For the 105 you can use the files of 107, basically it is the same device without Ethernet if I remember well.

Board files are up to you of course, there are several for F100, F103 and F107 to use as examples.

Giovanni

ChibiOS Free Embedded RTOS

mcuconf.h and linker files for STM32F105?

mcuconf.h and linker files for STM32F105?

Re: mcuconf.h and linker files for STM32F105?

Re: mcuconf.h and linker files for STM32F105?