ChibiOS Free Embedded RTOS

Hello,
Is it possible to set two channel (i.e. 0 and 1) in the same TIMER, when i need to start the channel1 earlier before the 50%of the duty cycle ends of channel0?
https://drive.google.com/file/d/0B1quj8sV3XPweU9lbmpKekJEdEk/view?usp=sharing

Is there any way to achieve this.
Thanks
BR,
jevan

Hi,

All PWM channels are synchronized on the activation front. What you need could be achieved (not sure) using multiple timers in a master/slave configuration but the driver does not support this.

See the TIM documentation on the STM32 Reference Manual.

Giovanni

Thanks Giovanni