STM32F030 porting
Posted: Tue Oct 06, 2015 6:54 pm
Hi,
As others have reported, I have configured my project by starting with the demos/STM32/RT-STM32F030R8-NUCLEO demo. I copied the board.c/h/mk files, and changed STM32F030x8 to STM32F030x6 as others have reported. (The ST headers do not yet include 030x4 but the 030x6 is closer than the 030x8).
One thing I had to also do, but am not sure of, is add the following to my mcuconf.h
In addition to the following:
Otherwise, it will fail to compile in os/hal/ports/STM32/STM32F0xx/ext_lld_isr.c
Is this the correct way to handle this? I would have assumed that by defining STM32F0xx_MCUCONF this would suffice?
As others have reported, I have configured my project by starting with the demos/STM32/RT-STM32F030R8-NUCLEO demo. I copied the board.c/h/mk files, and changed STM32F030x8 to STM32F030x6 as others have reported. (The ST headers do not yet include 030x4 but the 030x6 is closer than the 030x8).
One thing I had to also do, but am not sure of, is add the following to my mcuconf.h
Code: Select all
#define STM32F030In addition to the following:
Code: Select all
#define STM32F0xx_MCUCONFOtherwise, it will fail to compile in os/hal/ports/STM32/STM32F0xx/ext_lld_isr.c
Is this the correct way to handle this? I would have assumed that by defining STM32F0xx_MCUCONF this would suffice?