ChibiOS Free Embedded RTOS

Hi, i'm trying to develop a simple application with steval-mki121v1 , the inemo board. I just want to acquire data and blink a led, fixed a threshold.
Can someone tell me if there is a guide to begin to develop my own application with inemo? there is something of "already done" that i can use to start?
thanks

Hi,

An inemo demo is already included in the released ChibiOS and in ChibiStudio.

See under \demos\STM32\RT-STM32F103_INEMO_DISCOVERY, it blinks the LED and allows to send shell command via USB.

Giovanni

Hi, i saw the example, but it is complicated.
i need something easier to make my first step with inemo.
there is some guide about how to program inemo with chibios or other ide?
another question: i can't find drivers in the path C:\ChibiStudio\tools\openocd\drivers. where can i find them?

Mr.Cscn wrote:another question: i can't find drivers in the path C:\ChibiStudio\tools\openocd\drivers. where can i find them?

What drivers are you looking for? That directory isn't a normal part of the ChibiStudio distribution, and doesn't appear to be necessary.

steved wrote:

Mr.Cscn wrote:another question: i can't find drivers in the path C:\ChibiStudio\tools\openocd\drivers. where can i find them?

What drivers are you looking for? That directory isn't a normal part of the ChibiStudio distribution, and doesn't appear to be necessary.

from the chibios guide:
"You may need to install the drivers for your JTAG probe, OpenOCD has some
drivers under C:\ChibiStudio\tools\openocd\drivers. Please consult the
OpenOCD documentation in C:\ChibiStudio\tools\openocd\OpenOCD User’s Guide.pdf
and the documentation of your JTAG probe."
i can't find drivers and user's guide

Hi,

On http://www.playembedded.org there are video guides about ChibiStudio installation and use, you may start from there. It is very beginners-oriented.

Giovanni

thanks
i have aproblem with the demo inside chibios. when ii try to lunch it, an error appear: "Launch failed. Binary not found". why?

Hello Mr.Cscn,

Did you first compile your program without any error?
That error mean that your program binary was not found.
Verify also if the path to the binary is the right one if you realy have a binary.

Theo.