ChibiOS Free Embedded RTOS

Hi!

This question may be not ChibiOS, but stm32 related.
I would like to capture via ICU two signals on same timer. For example, if i use ICUD4 and would like to capture CHANNEL 1 and CHANNEL 2 (PB6 and PB7 pins) - is that possible?
If so, how to understand what pin cause an interrupt? And what happen if interrupt happen on both pins same time?

Thanks!

Hi,

The STM32 timers do not allow to measure 2 distinct signals at same time. The counter would be shared and each channel would reset it messing up the other channel measurement.

Giovanni

Thanks for you reply!

Seems, that EXTI and 1 shared timer is only one way, if i don't want to use 2 timers...