PAL macro define
Posted: Thu Jan 28, 2016 11:50 pm
Hi Giovanni,
I have a simple question about the implementation of the pal low level driver header file, where you made the define of GPIO register.
PAL_STM32_PUDR_* is the only one that does not have the same name as the register on the reference manual.
I expected to read PAL_STM32_PUPDR_* for the pull-up/pull-down register selection.
Of course it is not so important to have the same name but all the other registers are define like in the reference manual.
Theo.
I have a simple question about the implementation of the pal low level driver header file, where you made the define of GPIO register.
PAL_STM32_PUDR_* is the only one that does not have the same name as the register on the reference manual.
I expected to read PAL_STM32_PUPDR_* for the pull-up/pull-down register selection.
Of course it is not so important to have the same name but all the other registers are define like in the reference manual.
Theo.