ChibiOS Free Embedded RTOS

Hi everyone,
I'm building my project on my custom board which use stm32f103c8t6. I tried to flash my project to my mcu by stm32f051 discovery (or stm32f4 discovery, stm32f072 discovery which i also have). But it's not working.
I chose openOCD on ST-Link V2 then i chose olimex_stm32_h103.cfg. Chip is identified with follow logs:

Open On-Chip Debugger 0.10.0-dev-00107-ge4848fe (2015-11-13-11:49)
Licensed under GNU GPL v2
For bug reports, read
http://openocd.org/doc/doxygen/bugs.html
Info : auto-selecting first available session transport "hla_swd". To override use 'transport select <transport>'.
Info : The selected transport took over low-level target control. The results might differ compared to plain JTAG/SWD
adapter speed: 1000 kHz
adapter_nsrst_delay: 100
none separate
Info : Unable to match requested speed 1000 kHz, using 950 kHz
Info : Unable to match requested speed 1000 kHz, using 950 kHz
Info : clock speed 950 kHz
Info : STLINK v2 JTAG v21 API v2 SWIM v0 VID 0x0483 PID 0x3748
Info : using stlink api v2
Info : Target voltage: 2.870059
Info : stm32f1x.cpu: hardware has 6 breakpoints, 4 watchpoints

Then, I chose debug (flash and run) from drop down menu. Debug program still work but not correctly. MCU isnt erase and it run old program.
Can you help me?

Moved to the right section,
Ciao
RM

Probably you are choosing the wrong target .cfg file, try other F1 files and see if one of them works (both under boards/ and under targets/).

Giovanni

Thank sir, Giovanni and Rocco Marco.
I flashed my code to mcu stm32f103c8 succesfully by swd interface through stm32f072 discovery.
I used olimex_stm32_h103.cfg with stlink v2 base-on RT-STM32F103RB-NUCLEO (both of them are ported to stm32f103RB but it's ok with stm32f103c8t6).
Special thank to Rocco Marco Guglielmi who has supported me a long time.
Thank Sir, Giovanni who established ChibiOS. You are so great man.
Sorry because i'm so excited and happy.